1
) PROGRAM AND BANK SELECTOR FOOTSWITCHES
- These footswitches give
you access to the User Programs in the VoFX and allow you to change User Banks.
2) EFFECT GROUPS
- The VoFX's effects are divided into 13 groups and labeled on
the front panel. When lit, the LED in each group indicates that an effect in the
group is active.
3) EFFECT SELECTOR BUTTONS (VOCAL FX)
- This row of buttons lets you select
an effect group for editing, or to bypass the group completely. This group includes:
Preset Level, Mix, Reverb, Echo, Multi Delay, Detune, Pitch Shift, Phase, Tremolo, Pixellator, Ring
modulator, Chorus, Flange, Gate, High EQ and Low EQ.
4) EFFECT SELECTOR BUTTONS (MIC PREAMP)
- This row of 4 buttons lets
you change your basic preamp section settings. The preamp section consists of the
Mic Driver, and Compressor groups.
5) STORE BUTTON
- Stores your custom Programs in the User memory location
you select.
6) DISPLAY
- The LED display in Program mode, shows which Bank and Program is
currently selected. In Edit mode, it shows the number and/or status of the selected
effect.
7) DATA WHEEL
- In Program mode, use the Data wheel to scroll through
Programs. In Edit mode, use it to change the setting of effect groups.
8) CLIP LED
- The red Clip LED lights when clipping occurs at the input of the
VoFX. To eliminate clipping, reduce the setting of the Input Level control or the
Master Level parameter.
9) INPUT KNOB
- Controls the level of the signal at the VoFX's input stage.
10) OUTPUT KNOB
- Controls the overall output level of both the Left and Right
outputs.
Signal Processing
4
Signal Processing
Signal Processing
VoFX manual 7/25/00 11:04 AM Page 4
