DOD IS420W, Руководство пользователя

Страница: 18 / 34

17
External GPS Module
Clean Windshield
Wipe down both the interior and exterior glass to ensure firm installation.
Install at Desired Position
Peel off the protective mount cover.
Find a location which does not obstruct your view when driving.
DOD Tech recommends placing the camera behind the rear view mirror without
obstructing either lenses or camera functions.
Connect External GPS Module and Power to Dash Cam
Plug in the micro USB connector from external GPS module to dash cam, the GPS module
function as power bypass in addition to GPS functions.
1. Turn on Your Vehicle
In most vehicles, this will send power to the outlet and automatically turn on your camera.
In some vehicles, the power outlet is continuously powered even when the vehicle is off.
Turn on/off Your Camera
Press
【 】
to turn on or turn off the unit.
2. Adjust the Angle
The mount has an adjustable ball joint which allows angle adjustment to aim at desired
angle.
DOD Tech suggests to aim your camera slightly below the horizon line for maximum front
view.
3. Install the Cigarette Adapter
If you have not done so previously, plug the cigarette adapter into your vehicle's power
port. Insert the USB plug (opposite end of the power) into the USB port on the camera,
and insert the power adapter into the cigarette lighter socket of your car.
The wiring can be hidden in the headliner, seams and rubber strips around the perimeter
of the windshield.
4. Remove the Protective Lens Cover