DOD IS420W, Руководство пользователя

Страница: 14 / 34

13
Getting Started
3. Turn on Your Vehicle.
Power from your vehicle through the outlet will automatically turn on your camera and when
power is turned off your camera will shut off automatically. The camera automatically begins
recording every time it is turned on and stops recording when it is turned off.
Note: In specified cars, the power may be constantly supplied to the device even the
engine is turned off. This may run out the vehicle battery. The optional DOD DP4 kit
equipped with low-voltage protection design to prevent battery drainage.
4. Turn on/off Your Camera.
Press 【 】 to turn on or turn off the unit.
5. Select Language
➔
Set the Time Zone
➔
Select the Speed Unit of Your
Choice
Upon powering up the camera for the first time or after upgrading the firmware on the
device, you will need to go through the Settings below.
Select Language
Select the language of your choice by pressing 【

/

】 .
Press
【 】
found on the top of your unit to confirm your selection.
Set the time zone
Scroll down and select your respective time zone.
Press 【 】 .
Your camera will automatically sync with the time and date to the atomic clock once the
time zone is correctly set.
Note: The time zone must be manually adjusted for daylight savings.
Select the speed unit of your choice