DOD IS420W, Руководство пользователя

Страница: 25 / 34

24
Camera Settings
Each mode has a unique set of settings. See the description below.
Two Camera Settings pages are accessible:
Functional Settings
System Settings
The menu settings can be switched by pressing
【 】
.
If you move the cursor before pressing 【 】 , you must exit and try again.
Note: Press
【 】
to enter the camera settings when recording.
Video Recording: Functional Settings Page
Accessed by pressing 【 】 once.
WDR (Wide Dynamic Range)
Cannot be changed.
Shows WDR processing is enabled.
Exposure Value
Sets the brightness /darkness of the video.
Video too bright? Set between -1 to -3.
Video too dark? +1 to +3.
Recommended setting: 0
Record Audio
Switches the microphone on/off.
Can be used during recording by pressing button
【 】 .
Loop Recording
Can be set to 2, 3 or 5 minutes. Video recordings of the selected length will be recorded
onto the memory card. When the memory card is full, the oldest files will be overwritten,
excluding locked clips. Turing off loop recording will prevent the camera from writing new
files when the memory card is filled.
Resolution
Changes the video resolution. Lower the resolution for smaller file sizes but this reduces
video quality.
Recommended setting: 1080p FHD.