C L 1 U S E R S G U I D E
D O D T E C H N O L O G I E S , I N C
Rev 10.07
Page 10
Chapter 4 – Setup & Configuration
Follow this checklist to configure the CL1 for first time operation.
1.
___ Set passwords
(section 5.6.c)
2.
___ Set system date and time
(section 5.5.g)
3.
___ Gas selection
(section 5.5.i)
Appendix E contains the specifications for each gas.
4.
___ Alarm level settings
(section 5.4.e)
5.
___ Latching relays
(section 5.5.c)
6.
___ Energized Relays
(section 5.5.e)
7.
___ Idle Timeout
(section 5.5.f)
8.
___ Testing Contacts
(section 5.4.g)
9.
___ Adjustment of 4-20 ma
(section 5.5.h)
10.
___ Install new ChemLogic tape
(section 6.3)
11.
___ Install removable media
(section 6.6)
12.
___ Format removable media
(Appendix F.3)
13.
___ Tape Saver Mode
(TSM section 5.5.b)
14.
___ Grease the Gate Cam
(section 6.7)
Setup complete -
Ready for monitoring.