Docomo Style N-03B, Инструкция по эксплуатации, Страница: 134 / 170

22
Setting up Dial-up Network
This section describes how to set up a dial-up connection for packet communication / 64K data
communication without using DOCOMO Connection Manager. The flow of operation is described
below.
d
It is unnecessary to set up the dial-up network for 64K data communication. Go on to "Setting up
Dial-up" (p.29).
About AT commands
d AT commands are commands for modem control. The FOMA terminal complies AT commands
and supports some enhanced commands and its own AT commands.
d
Entering an AT command allows you to set or confirm (display) the detail settings and the contents
of the settings for the "Data communication" and FOMA terminal.
Checking the COM port
To set up the access point (APN), you need to specify the COM port number assigned to
"FOMA N03B" (Modem) built in after installing the FOMA communication setting file (drivers).
This section describes how to confirm the COM port number. The COM port confirmed here will
be used in the access point (APN) set up (p.25).
d
Preparation
This section takes the setting using the FOMA USB Cable with Charge Function 02 for
example.
1
Connect the FOMA USB Cable with Charge Function 02 (optional) to the
FOMA terminal
2
Turn on the FOMA terminal, then connect the FOMA USB Cable with
Charge Function 02 connected to the FOMA terminal to your PC
d
To check the COM port on Windows Vista
1
Open " " → " コントロールパネル " (Control Panel)
2
Open "
ハードウェアとサウンド
" (Hardware and Sound)
→
"
電話とモデム
のオプション " (Telephone and modem options) in Control Panel
3
If the "
所在地情報
" (Address information) screen is displayed, enter "
市外
局番／エリアコード
" (Area code) and click "OK"