Docomo N-02D, Инструкция по эксплуатации, Страница: 88 / 166

O
thers
86
i-mode fault diagnosis site
The service lets you check if your FOMA terminal's i-mode is working correctly
for operations such as sending/receiving mail, and downloading images/ring
tones. When there seems to be a malfunction as a result of checking, please
contact "Repairs" on the last page of this manual (in Japanese only).
■ Connecting to "i-mode fault diagnosis site" (Japanese)
p
s
"
お知らせ
(News)"
s
"
サポート情報
" (Support)
s
"
お問い
合わせ
" (Inquiries)
s
"
故障・電波状況お問い合わせ先
" (Inquiries for
fault/signal quality)
s
"
ｉモード故障診断
" (i-mode fault diagnosis)
・
Charges will apply if using the service overseas.
Updating software
This function establishes a network connection and checks whether the FOMA terminal software needs
to be updated. If update is required, this function downloads a part of software by packet communication
and then updates the software. When software update is required, the information can be viewed on the
NTT DOCOMO websites or in "
お客様サポート
" (User support) (in Japanese only) of iMenu. Software may
be updated in the following three methods : "Auto-update", "Now update" and "Reserved update".
* It is possible to perform software updates while keeping your Phonebook entries, camera
images, downloaded data and other data saved on the FOMA terminal intact. However, note
that in some cases data cannot be protected depending on the condition of your FOMA terminal
(malfunction, damage, water exposure, etc.). It is recommended that you back up necessary data.
Please note that it may not be possible to back up some data such as downloaded data.
■
Note
・
Never remove the battery pack while updating software. Doing so may cause the update to fail.
・ Charge the battery fully before updating software.
・
Software updates (downloading and rewriting) may take time.
・ While software is being updated, functions such as making calls, receiving calls or communication
functions, and other functions are not available (While downloading, voice calls can be answered).
・ It is recommended that you perform software updates when the FOMA terminal is stationary and in
a location with good signal quality (three bars for the antenna icon). If the reception becomes poor
and then the download is interrupted, try to update again in a location with good signal quality.
・
When software is updated, the unique information (model, serial number, etc.) of your FOMA
terminal is automatically transmitted to the server at DOCOMO. We do not use the transmitted
information for any purposes other than Software Update.
・ If the update fails, the message "Rewrite failed" will appear and all operations will become
unavailable. In this case, please seek advice at a repair counter specified by DOCOMO.
QR code to access the site