Docomo N-02D, Инструкция по эксплуатации, Страница: 79 / 166

More C
onvenien
t
Using microSD card
This FOMA terminal supports commercially available microSD cards of up to 2 GB and microSDHC cards
of up to 32 GB (as of October, 2011).
・ Make sure to format microSD card on N-02D. You may not be able to use microSD card formatted on
another terminal or PC.
・ Visit the following website for the latest information about supported microSD cards such as manufacturers
or capacity. Contact the microSD card manufacturer for any microSD cards that are not listed on the website.
- From i-mode (to access " みんな N らんど ")
• Select the shortcut icon " " （ みんな N らんど）→ p.30
• P p s " メニューリスト " (Menu List) s " ケータイ電話メーカー " (Mobile Phone Manufacturer)
s " みんな N らんど " (Japanese)
- From PC
http://www.n-keitai.com/ (in Japanese only)
Note that information described on the website is only the result of the operation check and does
not guarantee all operations.
・
Turn off the power before inserting or removing a microSD card.
・
Do not put a label or sticker on a microSD card.
・
Keep a backup copy of data stored in a microSD card. Please be aware that DOCOMO is not responsible
for any damages the subscriber may incur due to the card data being deleted, erased, or altered.
Inserting/removing microSD card
❶
Remove the back cover
❷
Slide the metal holder in the direction of arrow "OPEN" and lift it up
Do not touch the metal contacts of the FOMA terminal when lifting the holder up. Do not apply
excessive force to the holder when sliding it (you could damage the holder or hurt your hand or fingers).
❸
Insert the microSD card straight and slowly along the rails
with the metal contacts facing you
To remove the microSD card, hold the microSD card and
slowly pull it out along the rails.
❹
Close the metal holder and slide it in the direction of arrow "LOCK" to lock
If the holder does not close properly, lift the holder up and make sure that the
microSD card has been properly inserted along the rails and inserted deep enough.
❺
Attach the back cover
When you turn on the power after inserting the microSD card, " " appears.
Rail
Rail
Metal contacts of
the microSD card
Data Management
77