Docomo L-03C, Инструкция по эксплуатации

Страница: 146 / 158

30
AT Commands Overview Parameters/Descriptions
Command
Examples
AT+CBC Display the battery level
of the FOMA terminal. Result format:
＋ CBC:<bcs>,<bcl>
bcs=0 : Power is supplied
from the battery pack
bcs=1 : Power is not supplied
from the battery pack
bcs=2 : The battery pack is
not connected to the
FOMA terminal
bcs=3 : A call cannot be
made from the FOMA
terminal as a result of
a power supply error
bcl : Remaining battery
power is displayed
with a value from 0 to
100
AT+CBC
+CBC:0,70
OK
AT+CGDCONT Set access point
(APN) for packet
communication. See P35. See P35.
AT+CGEQMIN Register the threshold
to accept the QoS
(Quality of Service) sent
from the network when
packet communication
is established via a PPP
connection. See P35. See P36.
AT+CGEQREQ Set the QoS (Quality of
Service) to be requested
from the network when
packet communication via
PPP connection is dialed. See P36. See P36.
AT+CGMR Display the version of the
FOMA terminal. － AT+CGMR
XXXXXXXXXXX
XXXXX
OK
AT+CGREG=<n> Set whether to be
notified of the status
of registration to the
network. Display whether
in or out of service area
based on the information
received from the network. n=0 : Not notified (default)
n=1 : Notified
Notify when switching
in or out of service area.
AT+CGREG?
: Display the current status.
Result format:
+CGREG:<n>,<stat>
n : Display the current setting
value for whether a
notification is sent.
stat=0 : Out of the packet
service area
stat=1 : Within the packet
service area
stat=4 : Unknown
stat=5 : Within the packet
service area (while
roaming)
AT+CGREG=1
OK
(When notification
is set to be sent)
AT+CGREG?
+CGREG:1,0
OK
(When out of the
packet service
area)
AT+CGSN Display the serial number
of the FOMA terminal. － AT+CGSN
XXXXXXXXXXX
XXXX
OK