Docomo L-03C, Инструкция по эксплуатации

Страница: 107 / 158

105
Others
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with
the FCC RF exposure guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display
Grant section at http://www.fcc.gov/oet/ea/fccid/ after search on
FCC ID BEJL03C.
For body worn operation, this phone has been tested and meets
the FCC RF exposure guidelines when used with an accessory
designated for this product or when used with an accessory that
contains no metal and that positions the handset a minimum of
2.5cm from the body.
* In the United States, the SAR limit for wireless mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. SAR values may vary depending
upon national reporting requirements and the network
band.
Declaration of Conformity
The product “L-03C” is declared to conform with the essential
requirements of European Union Directive 1999/5/EC Radio and
Telecommunications Terminal Equipment Directive 3.1 (a), 3.1 (b)
and 3.2.
This mobile phone complies with the EU requirements for exposure
to radio waves.
Your mobile phone is a radio transceiver, designed and
manufactured not to exceed the SAR* limits** for exposure to
radio-frequency (RF) energy, which SAR* value, when tested for
compliance against the standard was 0.756W/kg. While there may
be differences between the SAR* levels of various phones and
at various positions, they all meet*** the EU requirements for RF
exposure.
*
**
***
The exposure standard for mobile phones employs a unit
of measurement known as the Specific Absorption Rate,
or SAR.
The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of tissue,
recommended by The Council of the European Union. The
limit incorporates a substantial margin of safety to give
additional protection for the public and to account for any
variations in measurements.
Tests for SAR have been conducted using standard
operating positions with the phone transmitting at its
highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This
is because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a base station
antenna, the lower the power output.