u
W
[Caller ID notification]
W
[Notify]/
[Not notify]
W
Entering Push Signals
Push signals are used for operating home answer phone or
for using services such as ticket reservation and bank
balance check.
If you use [Add 2-sec pause] or [Add wait] when using a
service requiring an additional number to be input during
call, you can input both the phone number and additional
number and make a call.
[Add 2-sec pause] (,): After the phone number has been dialed,
the mobile phone calls the additional number automatically after
a 2-second pause.
[Add wait] (;): After the phone number has been dialed, the
mobile phone stands by automatically, and a message as to
whether the additional number is to be called or not is
displayed. When you tap [Yes], the additional number is called.
Home screen
W
[Phone]
Enter phone number
u
W
[Add 2-sec pause]
"," is entered.
Enter push signals to transmit
W
Push signals are automatically transmitted about
two seconds after connection is made.
• To send push signals manually,
u
W
Tap
[Add wait] in step 3 and enter ";".
Transmit each signal after step 4.
128
Phone
