Information
• You can also use packet communication when the Wi-Fi
function is enabled. However, Wi-Fi is given priority when
the mobile phone connects to Wi-Fi network. If the mobile
phone is disconnected from the Wi-Fi network, LTE/3G/
GPRS network connection will automatically take over. Note
that packet communication fee will be charged if you
continue using the network connection.
• If connection to a Wi-Fi network is lost because, for
example, you are outside the service area, automatic
connection after re-entering the service area might take
some time.
• When connecting to an access point you have selected, if
you enter an incorrect password (security key),
[Authentication problem] will be displayed. Verify the
password (security key). If [Avoided poor Internet
connection] is displayed, the correct IP address might not
have been obtained. Check the status of the signal, and then
try to connect again.
• When using the docomo service via Wi-Fi while using a Wi-Fi
connection, you must set the "Wi-Fi option password".
The password can be set by selecting home screen
W
[Settings]
W
[docomo service]
W
[Wi-Fi settings for
docomo apps].
■
WPS
If an access point supports "WPS", some simple operations will
allow you to connect to the access point.
To connect by using the WPS push button method, in step 3,
tap
, and push the WPS button on the access point.
To connect by using the WPS PIN method, in step 3, tap
u
W
[WPS Pin Entry], and then enter the PIN code displayed on
the mobile phone into the access point.
101
Preliminary Check and Setting
