Docomo Arrows X F-10D, Инструкция по эксплуатации

Страница: 34 / 173

Before using the terminal
32
･
If the charge information of the wireless charger flashes
rapidly, it may be an abnormality of charging or
malfunction. Check if no foreign substance between the
wireless charger and terminal, then position the terminal
at the center of the charging area or remove and insert
the power plug from and into the outlet.
･
If the battery pack becomes hot, charge information
flashes slowly and stop automatically even if the
charging is not complete.
･
Place the wireless charger as far as possible from TVs or
radios because charging may cause noises on TVs or
radios.
･
Using electronic devices around the wireless charger
may cause failure of charging. Use electronic devices 30
cm or more away from the wireless charger.
･
While charging with the wireless charger, call conditions
or reception conditions of 1Seg may become deteriorate.
◆ Charging with AC adapter
Charge with the AC adapter 03 (optional).
a
Insert a USB power plug of a microUSB cable into the
AC adapter jack
b
Open the jack cap of the terminal, insert a microUSB
plug of a microUSB cable into the external connection
jack with engraved side facing up
c
Insert the AC adapter's power plug into an outlet
･
Indicator LED lights red while charging, and turns off
when charging is complete.
d
When charging is complete, remove the AC adapter's
power plug from the power outlet
e
Remove the microUSB plugs from the AC adapter and
the terminal, and close the jack cap of the terminal
◆ Charging with a PC
If you connect the terminal with a PC using a USB Cable for
PC connection T01 (optional), you can charge the terminal
with a PC.
･
When a screen of new hardware detection or operation
selection appears on the PC, select " キャンセル
(Cancel)".
microUSB plug
Indicator LED
Jack cap
USB plug
To AC 100V outlet
Power plug
AC adapter
main unit
microUSB
connection cable