Docomo Arrows X F-10D, Инструкция по эксплуатации

Страница: 154 / 173

Appendix/Index
152
This function allows you to connect the network and
check if software in the F-10D needs to be updated, if
software update is necessary, it downloads software to
update.
Check the NTT DOCOMO website to see if software
updates are necessary.
･
Software may be updated in following 3 methods :
Automatic Update : Automatically download file to
update at the specified time.
Now update : Update software immediately.
Reserved update : Automatically update software at the
time set in advance.
✔
INFORMATION
･
Software update can be done even when various data,
such as phonebook entries registered in terminal, camera
images, mail, downloaded data, are remaining; note that
data protection sometimes cannot be secured according
to the conditions of your terminal (such as malfunction,
damage, or water leak). DOCOMO recommends backing
up necessary data. However some data such as
downloaded data may not be backed up.
◆ When updating software
･
Do not remove the battery pack while updating
software. The update may fail.
･
Software update should be done with battery fully
charged. You are recommended to connect charging
cable when updating software.
･
Software cannot be updated in the following cases.
- During a call
- When 圏外 (out of service area) is displayed
*
- During international roaming
*
- When Airplane mode is on
*
- While upgrading the operating system
- When date and time are not set correctly
- When the remaining battery is not sufficient for
software update
- When the remaining memory is not sufficient for
software update
* During international roaming or when the terminal is out of
service area, updating software is not available even though
you are connected via Wi-Fi.
･
Software update (downloading or rewriting) may take
time.
･
Making/Receiving calls, communications functions and
other functions are disabled during software update.
Only incoming calls can be answered while
downloading.
･
Stay in a place with strong radio wave condition when
updating software. Software update may be canceled if
the radio wave condition is not good enough.
･
If software update is not needed, [No update is needed.]
appears.
･
During international roaming or when the terminal is out
of service area, [When docomo network is not available,
or during roaming software update is not available even
if Wi-Fi is connected.] or [When docomo network is not
available, or during roaming, install cannot be started
even if Wi-Fi is connected.] appears. The same
messages appear even while connecting via Wi-Fi.
･
SMS sent during software update is stored in the SMS
center.
Software update