Docomo Arrows X F-10D, Инструкция по эксплуатации

Страница: 146 / 173

Appendix/Index
144
● The terminal cannot be charged with the included
wireless charger (the charge information does not
turn on).
• Is a dedicated AC adapter used?
• Is the AC adapter power plug or connector seated
all the way?
• Is there any foreign substance between the wireless
charger and terminal?
• Charging is complete or almost complete.
• Is the terminal or battery pack put around the center
of the charging area?
• Place the terminal or battery pack in the right
direction.
●
The terminal cannot be charged with the wireless
charger (the charge information is flashing fast).
• Is a dedicated AC adapter used? Is the AC adapter
normal? If the situation does not improve using an
dedicated AC adapter, remove the power plug and
reinsert it several seconds later.
• Is there any foreign substance between the wireless
charger and terminal?
• Put the terminal or battery pack around the center of
the charging area.
● The terminal cannot be charged with the wireless
charger (the charge information is slowly flashing (at
approximately 1 sec. interval)).
Is temperature of the terminal or battery pack too high
or too low? Put the terminal or battery pack in a place
where the temperature is 5-35
℃
for a while, then retry
to charge.
●
It takes much time to charge with the wireless
charger.
Is room temperature too high or too low? Charge the
battery in an area where the temperature is 5-35
℃ .
● The terminal cannot be charged with the wireless
charger (the charge information moves and keeps
flashing).
Remove the terminal or battery pack from the
charging area, and then put it around the center of the
charging area approximately 2 seconds later.
● Charging with the wireless charger stops midway.
Remove the terminal or battery pack from the
charging area, and then put it around the center of the
charging area approximately 2 seconds later.
■ Operations/Display
●
Turning the power off or restarting automatically
happens.
If the jack of battery pack is dirty, the contact may
become poor and the power may shut OFF. If it is
dirty, clean with a dry cotton swab.
● No operations are performed even by pressing
button.
Is the terminal in sleep mode? Cancel sleep mode by
pressing
X
or
B
→
P37
● The operation time provided by the battery pack is
short.
• Running multiple applications increases battery
consumption and usage time may become short.
Exit from applications which you are not using as
follows.
- Exiting applications with task manager
→
P38
- Exit application by
c
• Use "NX! eco" to make settings for reducing battery
consumption → P74
• For reducing battery consumption, refer to
ARROWS@ (http://atfe.fmworld.net/at/) (in
Japanese only).
• Is the terminal left for a long time under the state of
out of service area? Out of service area, a lot of
power is consumed to search available radio waves.
• The operation time provided by the battery pack
varies by the operating environment and battery
pack's deterioration.
• The battery pack is a consumable part. Each time it
is charged, time available with each charging
reduces. Even the full charge state, when the
operation time is too short, purchase a new battery
pack of the specified type.
●
The docomo mini UIM card is not recognized.
Is the docomo mini UIM card installed in the right
direction?
→ P25