36
SH-06D_E_02.fm
[36/54]
Before Using the Handset
4
When charging lamp turns off,
charging is complete
:
When charging is complete, remove the
microUSB plug horizontally from the handset
(
1
).
:
When removing the connector from the
FOMA charger micro USB adapter SH01,
always hold the release buttons on both
sides (
2
) and unplug it horizontally (
3
).
When the handset is turned on, you can charge
the handset by connecting the handset to a PC
with the microUSB cable for PC (sample).
Install the USB driver to the PC in advance.
･
For details on installing USB driver, refer to
“Manual for USB Driver Installation” in PDF
format in the following site.
(
http://k-tai.sharp.co.jp/support/d/sh-06d/
download.html#usb_driver
)
(in Japanese only)
For details on connecting to a PC
n
P. 112
1
H
(for at least 2 seconds)
:
When you turn the power on for the first time,
the initial setting screen is displayed. Each
setting item can also be set from menus
(
n
P. 40).
:
If the initial setting screen for docomo service
is displayed, operate by following the
instructions on the screen.
1
H
(for at least 1 second)
/
[Power
off]
/
[OK]
Do not forcibly insert or remove. May cause
damage to the external connector terminal, the
microUSB plug and the connector.
Pull the adapter out of the outlet or cigarette
lighter socket if it will not be used for a long
time.
Do not forcibly pull the external connector
terminal cover. May damage the cover.
Do not place objects near the handset when
charging. May damage the handset.
When using a DC adapter
The DC adapter should only be used in
negative grounded vehicles (12 and 24V DC).
Do not use with the car engine shut off. May
drain the car battery.
Release buttons
The DC adapter fuse (2A) is a consumable. For
replacement, purchase a new fuse at a local
vehicle supply shop.
Refer to the user’s guide of FOMA DC Adapter
01/02 and DC Adapter 03 for details.
Charging with microUSB cable
for PC
Turning power ON/OFF
Turning power ON
Turning power OFF
SH-06D_E.book 36 ページ ２０１２年３月１９日 月曜日 午前１０時３２分