28
SH-06D_E_02.fm
[28/54]
Before Using the Handset
1
Sub camera
2
Charger terminal
Use for charging with the accompanying
desktop holder.
3
Power supply terminal
Use for supplying radio waves of Mobacas
from the desktop holder.
4
Display/Touch panel
5
Strap hole
6
Earpiece
7
Proximity sensor/Brightness sensor
*1
The proximity sensor detects the distance to
the face and prevents inadvertent operation of
touch panel during a call.
The brightness sensor detects the brightness
of the surrounding area and adjusts the
brightness of the backlight.
8
Incoming/Charging lamp
The lamp will illuminate/flash according to the
function being used and situation.
9
Mouthpiece/Microphone
a
z
: Menu key
Displays available functions (menus) in a
screen.
b
|
: Home key
Displays the main page of the home screen.
c
{
: Back key
Returns to the previous screen.
d
Main camera
e
Mobile light
f
H
: Power key
Use to turn the power on/off, etc.
Use to set/disable the sleep mode.
g
x
/
y
: Volume UP/DOWN key
Adjusts the volume in each function.
h
FOMA antenna
*2
i
External connector terminal
j
Infrared port
k
a
mark
IC card is contained (It cannot be removed).
l
microSD Card slot
m
docomo mini UIM card slot
n
1Seg/Mobacas antenna
o
Back cover
p
Speaker
Ring tone, music, etc. can be heard from
here.
The other party’s voice can be heard from
here during a hands-free call.
Using earphone/microphone
If you use an earphone/microphone which is not
compatible with the external connector terminal,
connect the handset to the commercially
available earphone/microphone with the
accompanying Earphone Plug Cable (with
Antenna) SH01 before use.
For compatible earphones/microphones, refer
to the following website.
(
http://k-tai.sharp.co.jp/support/d/sh-06d/
peripherals.html#!/earphone_support
)
(in
Japanese only)
Earphone/
Microphone
plug
Earphone/
Microphone
terminal
Connector
section
Earphone Plug Cable
(with Antenna) SH01
Open external
connector
terminal cover
SH-06D_E.book 28 ページ ２０１２年３月１９日 月曜日 午前１０時３２分
