Docma TT600 Electric, Инструкция по эксплуатации и обслуживанию

Страница: 13 / 21

16
ATTENTION
- Check that the actuator of the machine is not moving when you are connecting/disconnecting the cardan shaft.
- While carrying out a job, do not allow anyone to come close to the cardan or the actuator.
DANGER
Never use properly sharpened blades or blades not fit for the material to be cut.
6.3.3 DISMANTLING AND REPLACING THE BLADE
DANGER DO NOT REPAIR, REGISTER, LUBRICATE OR CLEAN ANY MOVING PARTS
Ensure that the supply cable is disconnected from the mains, or that the shaft drive is not connected to the actuator shaft, before
starting any cleaning operation on the saw.
Remove the external protection and any fastening element (screws, washers, etc.). Remove the return spring. Remove the piece-blocker
and its fixings.
Remove any fixing element (bolts, nuts, etc, ) from the tilting worktop. Lift and remove the tilting worktop, avoiding contact with the blade.