1
Owner’s Manual
Instructions for Assembly, Testing, Operation, Servicing, & Storage
Log Splitter: Outdoor hydraulic machine that splits wood logs.
WARNING
READ and UNDERSTAND this manual completely before using log splitter.
All operators of this equipment must read and completely understand all safety information, operating instructions,
maintenance and storage instructions. Failure to properly operate and maintain the log splitter could result in serious
injury to the operator or bystanders from moving parts that can crush or cut, flying objects, burns, fire or explosion,
escaping high pressure hydraulic fluid, or carbon monoxide poisoning. In particular, be aware of the following
hazards:
Crush and Cut Hazards
Moving parts can crush and cut hands and fingers. Keep hands clear of endplate, wedge, and logs while splitting.
High Pressure Hydraulic Fluid Hazards
High fluid pressures and temperatures are developed in hydraulic log splitters. Hydraulic fluid escaping through
even a pin-size hold opening can puncture skin and cause severe blood poisoning. Inspect hydraulic system
regularly for possible leaks. Never check for leaks with your hand while the system is pressurized. Seek medical
attention immediately if injured by escaping fluid.
Fire Hazards
If your log splitter is intended for use near any ignitable forest, brush, or grassy covered land, the engine
exhaust should be equipped with a spark arrestor. See the “Specifications” section of this manual to determine
if your splitter already has a spark arrestor. If not equipped, call NorthStar Product Support for ordering
information.
Keep a fire extinguisher with you that is rated for ordinary combustibles and flammable liquids
STOP!
ADD OIL TO ENGINE BEFORE USING:
Engine is shipped without oil. DO NOT start log splitter without first
adding oil. See instructions on p.7.
VERIFY HYDRAULIC OIL LEVEL:
Hydraulic reservoir is shipped with oil. Verify oil level is 1” from top before
using. See instructions on p.8.
Any Questions, Comments, Problems or Parts Orders
Call NorthStar Product Support 1-800-270-0810
M11954H
ITEM NUMBER
:
11954
SERIAL NUMBER
:
_______________
Содержание 11954
Страница 2: ...Hazard Signal Word Definitions 2...
Страница 6: ...Safety Label Locations 6...
Страница 28: ...Parts Breakdown Exploded View 11954 Rev H 28...
Страница 36: ...36 Manufactured by Northern Tool Equipment Co Inc Burnsville MN 55306 NorthernToool com...