Docma TT600 Electric, Инструкция по эксплуатации и обслуживанию

Страница: 16 / 21

19
ATTENTION
Regularly check that the bearings on the saw shaft are well lubricated.
9.2 – EXTRAORDINARY MAINTENANCE
Proper use and observance of the maintenance guidelines presented in the previous paragraph, normally guarantee a prolonged utilization of the
machine over time, in absolutely safe conditions.
If the need to replace worn parts, or components that have been damaged in their functionality, should arise, it is paramount that the user contacts
DOCMA technical support.
9.3 – STORING THE MACHINE
In the event of long periods of inactivity, keep the machine in an area sheltered from rain, only after carrying out the cleaning operations described in
§7.
10 DEMOLITION OF THE MACHINE AND DISPOSAL
The machine does not contain substances or materials which could pollute or be harmful for people. Therefore there are no particular directions
regarding its disposal.
DANGER
If you decide to dispose of the machine, remove the blades which, presenting a lot of very sharp edges, could be dangerous.
11 SPARE PARTS: GENERAL GUIDELINES
DANGER
If you need spare parts, we always recommend to indicate the following information:
- MACHINE SERIAL NUMBER - NUMBER OF PARTS REQUIRED - POSITION OF THE COMPONENT
Liste des pièces de rechange conseillées :
POSITION DESCRIPTION PIECES PER MACHINE
1. Blade-protecting guide in light alloy 1
2. Steel blade 1
3. Motor (only for electric model) with switch and pulley 1
4. Thermomagnetic switch (only for electric model) 1
5. Drop Box for transmission to the cardan shaft (only PTO model) 1
6. Protection cover for cardan shaft (only PTO model) 1
12 TECHNICAL SUPPORT
DOCMA technical support is always at your disposal for any requests you may have. DOCMA Ltd - Via dell’artigianato, 14 - Raldon-S.Giovanni
Lupatoto (VR)-Italy Phone: +39 045 8732006 - Fax: +39 045 8739889 - e-mail: info@docma.vr.it