Docma TT600 Electric, Инструкция по эксплуатации и обслуживанию

Страница: 8 / 21

11
5 RESIDUAL RISKS
DANGER
It is the duty of the company owner, or the person in charge of safety, to provide the operator with all the information and help
required to guarantee personal safety while operating the machine.
Each phase in the development of our saw-benches, from design to initial drawing, from dimensioning to manufacturing and testing, was carried out
with maximum attention and care for quality, both mechanical and structural. This guarantees a safe utilization for the personnel, with limited
environmental footprint.
Yet we must point out that, despite all the care applied, the machine provided presents certain risks which cannot be completely eliminated, due to
the type of operations involved.
Therefore the operator must absolutely be informed about the residual risks listed hereafter, and must use the machine paying maximum attention at
all times.
ATTENTION
The operator must be given a copy of this manual, making sure he reads it thoroughly and learns how to operate
the machine safely.
5.1 RISK RELATED TO CUTTING
This danger is always present, during normal operations but also when replacing the blade or cleaning the machine.
DANGER Wear protective gloves
All activities of normal operation, cleaning and maintenance shall be carried out only after wearing appropriate devices for personal
protection (protective gloves).
DANGER DO NOT REPAIR, REGISTER, LUBRICATE OR CLEAN ANY MOVING PART
Ensure the supply cable is disconnected from the mains or the cardan is disconnected from the transmission shaft, before carrying
out any cleaning on the machine.
DANGER
Start the machine only after checking that all protection devices (blade guard, belt carter, various springs) are properly installed and
functioning.