7
2.2 ENVIRONMENTAL CONDITIONS
The machine must be positioned outdoors on level ground, or if required inside a building, as long as
this is well lit, ventilated and has a solid and level floor.
For models
, an effective engine exhaust gas discharge system is required.
2.3 LIGHTING
The lighting in the workplace must be compliant with the laws in force in the country where the machine
is used and must in any case ensure good visibility in every position (recommended 300 lx); there must
not be areas in shadow or dangerous reflections.
2.4 VIBRATIONS
If the machine is used in accordance with the instructions for correct operation, the vibrations produced
will not create situations of danger.
2.5 NOISE EMISSIONS
The machine is designed and built in such a way as to reduce the level of noise emissions at the source.
The level of noise during operation, excluding models , is very low (< 90 dB) and consequently no
precautions are necessary; nonetheless, it is recommended to use earmuffs for hearing protection.
2.6 OPERATING PRINCIPLE
The machine is powered by the connection to the power supply, as indicated in the following diagram:
2
4
5
6
3
1
1 - Power supply
2 - Hydraulic pump
3 - Drive shaft
4 - Gearbox
5 - Hydraulic system
6 - Log-splitting wedge