Dobot MOOZ-2 PLUS, Руководство по эксплуатации

Страница: 19 / 30

16
IV CNC Carving
4.1 Install the CNC Platform and Workpiece
Warning : Heated bed (including the glass and magnets) is a fragile component, please operate with care! Do not mount and dismount it regularly during daily use.
Gently separate the heated bed glass and workbench. Changing CNC Tool
Put the dust washer on the
workbench and align the holes.
Install the length adjustment
screw into the clamp.
Put the MDF plate on the dust washer and
align the holes. Adjust the position of the
fixture according to the size of the workpiece,
and tighten the four screws to fix the fixture.
CNC dustproof gasket
Note: Please be sure to tighten the screws to fix the platform. Check them regularly in case of looseness after long time use.
Hexagon Screw
Thumb screw
Clamp
Workpiece
Protective
Shield
No Touch
Warning
Note: Please be sure to wear the goggles and use the protective shield for safety!