10
9
Mode:
1
1.5S
2
1.5S
2S
+
4
2S
1.5S
+
Mode:
4
1.5S
1.5S
+
5
1.5S
2S
+
1
1.5S
2
1.5S
1S
+
However, if the dog stops barking for 30 seconds, the duration will
be automatically reset to the initial.
When you press button, you will hear one beep from the collar,
which means the beep mode is selected and ready to use.
1
1.5S
Mode:
2
2S
3
2S
1.5S
+
3
1.5S
2S
+
3
1.5S
1S
+
HOW TO CHOOSE ONE OF ANTI BARK MODE
The collar just beep on the 1st time and 2nd time as a initial warning
on your dog barks. When your dog barks the 3rd time, it will add in
Shock, the shock intensity is the level 100.
However, if the dog stops barking for 30 seconds, the beeping
duration will be automatically reset to the initial.
When you press button, you will hear two beeps from the collar,
which means the vibrate mode is selected and ready to use.
The collar just beep on the 1st time as a warning on your dog barks.
When your dog barks the 2nd time and 3rd time, it will add in Vibrate.
in the 4th time, it will add in Shock, the shock intensity is level 100.
However, if the dog stops barking for 30 seconds, the beeping
duration will be automatically reset to the initial.
When you press button, you will hear 3rd beeps from the collar,
which means the shock mode is selected and ready to use.
The collar just beep on the 1st time as a warning on your dog barks.
When your dog barks the 2nd time to 5th time, it will add in Shock,
based on your settings.
NOTE:
if the continued stimulus reaches the 5 times, then the collar
will stop working for 30 seconds to protect the dog even he still barks.
the LED light will flashing 30 seconds at the same time.
HOW TO SET THE SENSITIVITY LEVEL FOR ANTI BARK MODE
Pressing and hold the button for 0.5 seconds every time to set the
sensitivity level. do not hold it over 3 seconds, the collar will into the
pairing status and you can’t pairing the collar in Channel A position.
When you hear 1 beep from the collar,
you set to the level 1.
When you hear 2 beeps from the collar,
you set to the level 2.
When you hear 3 beeps from the collar,
you set to the level 3.
When you hear 4 beeps from the collar,
you set to the level 4.
When you hear a long beep from the collar, you set to the level 5.
HOW TO TESTING THE ANTI BARK MODE
We would recommend faux sounds to provoke the behavior before
actually using the product to correct it automatically.
Please make sure the Metal Probes Contact Points is touch your
dog’s neck skin both. We have used a new technology to identify the
barks from your dog by vibration and trigger the collar work to avoid
false trigger caused by other dog barks around your dog.
So if your dog's bark isn't causing a vibration against the sensor it
doesn't work.
NOTE:
Level 5 is highest sensitive and easy to work when the dog
barks, sometimes you need to adjust to the lower level to fit your dog.
Содержание DB400
Страница 1: ...400...
