DOBE DB400 Скачать руководство пользователя страница 4

5

6

Anti Bark Collar LED Indicator Light

Blink every 3 seconds during standby until no operations have been 

completed for 20 min. 

On when the collar is working or mode buttons on the remote are 

pressed.

It will turn on during charging and when the battery fully charged.

Flash quick during the 10 seconds pairing process.

Blink twice per second when the collar need to charging.

HOW TO FIT COLLAR ON YOUR DOG

The collar size is adjustable to fit your dog's neck between 9" and 26". 

If your dog's neck circumference is smaller than 9” or larger than 26”, 

this collar is not suitable. 

A well-fitted collar is essential for ensuring 
that the two metal probe contact points 
press firmly against the dog's skin, which 
will foster training efficiency and quality. 
When the collar is fitted and connected 
properly, there should be enough space 
to fit one or two fingers snugly in between 
the contact points on the receiver on the 
collar and the dog's skin. 

The collar should not be worn by dogs under 10 pounds. 

NOTE:

 Please make sure that both of Metal Probes Contact Points are 

touch your dog’s neck skin. this is very important, it will effect whether the 

Anti Bark Mode can work or not. and also effect on safe when you use 

SHOCK MODE.

Under Dog’s Neck 
Touch The Dog’s Skin

When you adjust the collar to fit your dog’s neck there was an excessive 

amount hanging over if you want to cut the excessive amount off. Please 

burn the end of the collar to prevent the whole thing frayed.

These steps will help your dog safe and comfortable.

A collar worn for too long or made too tight on the dog's neck may 
cause skin damage, ranging from redness to pressure ulcers 
(commonly known as bed sores). Examine the contact area daily 
for signs of a rash or a sore. If a rash or sore is found, discontinue 
use until the skin has healed. If the condition persists beyond 48 
hours, see your veterinarian.

These collars can cause pressure necrosis if used incorrectly and 
is often misidentified as burns.

If possible, reposition the collar on the pet's neck every 1 to 2 hours.

Never connect a lead to the electronic collar, because it may cause 
excessive pressure on the contact points.

Wash the dog's neck area and the contacts of the collar weekly 
with a damp cloth.

So please check your dog’s neck every day, may cause skin damage. 

Ranging from redness to pressure ulcers; this condition is commonly 

known, as bed sores. 

Содержание DB400










Отзывы: