DoAll 500SNC, Инструкция по эксплуатации

Страница: 3 / 35

i
The following registered trademarks of the DoALL Company are used in this manual:
DoALL, Imperial Bi-Metal, Kleen-Kool, and Tensigage.
MODEL FIRST SERIAL NO. LAST SERIAL NO.
500SNC 592-13178
PRINTED IN U.S.A. PB-541.3 (5-13)
For your information and future reference, pertinent data concerning your
machine should be written in the spaces provided above. This information is
printed on a label or stamped on a plate attached to your machine. Be sure
to provide machine model and serial numbers with any correspondence or
parts orders.
Specifications contained herein were in effect at the time this manual was
approved for printing. The DoALL Company, whose policy is one of continuous
improvement, reserves the right, however, to change specifications or design
at any time without notice and without incurring obligations.
OPERATOR'S INSTRUCTION MANUAL
METAL CUTTING BAND SAW
DoALL SAWING PRODUCTS
2375B TOUHY AVENUE
ELK GROVE, ILLINOIS 60007 U.S.A.
PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING THE MACHINE!
For Sales, Parts and Service, call 1-888-362-5572