96
DNP Imagingcomm America Corporation
Changing the Test Print Setting
WPS Pro User Guide
Archiving Images
1.
Make sure your
Archive
setting is set to ON. “Configuring Image Archiving” on page 94 for more information.
2.
Insert a micro SD card in the slot on the back of the WPS Pro device.
3.
Once you print your image, your image is saved to the directory on your micro SD card.
Note
Your card must have a directory called
DNParchive
for your images to be saved.
If you do not have a micro SD card inserted into the slot, your images will not be saved.
Changing the Test Print Setting
When the WPS Pro starts, a test image is automatically printed. Use this procedure to enable or disable that setting.
1.
Under the
General
section of the
WPS Pro Configuration
screen, locate the
Init Test Print
option.
2.
Using the radio buttons, set test images to either
OFF
or
ON
.
3.
Scroll to the bottom of the page and touch the
Save Configuration
button.
4.
Upon touching the
Save Configuration
button, your device restarts.
5.
After three minutes, reconnect to the WPS Pro Wi-Fi network. (If you have initial test prints turned ON, reconnect
once your test image prints.)
6.
Return to the
WPS Pro Configuration
screen to confirm the change has been made.
