DNIPRO M EN-25, Руководство по эксплуатации

Страница: 16 / 32

Electric stapler
12
ENG
Dear Customer!
Thank you for purchasing Dnipro-M product of innovative design and high quality
workmanship. This product is one of High Quality Tools product range that combines
modern design solutions and high performance with extended continuous operational
time. We hope that our products will serve you in your works for years to come.
1. DESCRIPTION OF THE EQUIPMENT
The electric stapler is designed to accelerate the process of hammering nails, studs
and staples during various construction, repair, finishing, decorative works, etc. This tool is
recommended for fastening cardboard, plywood, fabric, wire mash, insulating material, films,
linoleum, leather and similar materials to wood or wood-like materials for household use.
Dnipro-M trademark tools are continuously enhanced and improved. Therefore,
technical data and design can be changed without prior notice. We apologize for
any possible inconveniences concerned.
2. GENERAL SAFETY REGULATIONS
Before you try to operate the electric tool, please read carefully all recommendations
stated in this manual. For the purpose of safe use:
• Keep your workplace clean and tidy. Any obstruction at workplace or on worktable may
cause injury.
• Pay attention to workplace environment. Provide for good lighting. Do not operate the
electric tool near flammable liquids or gases.
• Beware of electric shock hazard. Do not operate the machine in the rain or in the snow.
Do not use the electric tool in premises with high humidity. Protect the electric tool from
rain and moisture. Water ingress into body may cause electric shock.
• During the electric tool operation, do not allow children stay by side. Do not allow
outsiders touch the electric tool or extension cord.
• Unauthorized persons shall not stand about the area of the tool operation.
• Upon works completion, store the electric tool in a specially designated place.
• The work is performed better and safer if the electric tool is operated according to
stipulated norms, loads, force and speed.
• Choose the appropriate tool for each specific job. Never try to perform any operations
intended for powerful professional electric tool with household electric tool of low
power. Do not use electric tools for purposes they are not intended for.
• Pay attention to work clothes selection. Do not wear any loose working clothes or finery
because they can be captured by moving parts of electric machine. Hide long hair
under head wear.
• For works outdoor, recommended is to wear rubber gloves and boots with non-
slippery sole.
• Use safety goggles.
• Avoid damages to the power cord. Never carry the electric tool holding it by a power
cord. Do not pull the cord to take the plug from receptacle. Protect the mains cable
against high temperatures, chemically active liquids and sharp-edged objects.