DNIPRO M EN-25, Руководство по эксплуатации

Страница: 19 / 32

ES-16, EN-25
15
ENG
5. SCOPE OF SUPPLY
ES-16 EN-25
Stapler 1pc. Stapler 1pc.
Staples 14mm 400 pcs. Staples 19mm 300 pcs.
Nails 15mm 100 pcs. Nails 25mm 100 pcs.
Manual 1 pc. Special wrench
Package 1 pc. Manual 1 pc.
Package 1 pc.
6. APPEARANCE
7. OPERATION
Use only appropriate types and sizes of consumables for this electric tool. Prior to insert
consumables into the magazine it is strongly recommended to disconnect the power cord
from the mains. It is not recommended to insert staples (nails) into the magazine until the
previously inserted ones are not completely expended.
For safety reasons, the tool has a locking device (an automatic safety device to prevent
a spontaneous shot). It is prohibited to direct the electric tool towards yourself, other
people or animals.
Do not operate the electric tool until it is pressed against the workpiece. If no sufficient
contact between the electric tool and workpiece, the staple (nail) may kick out from the
fixing point.
ES-16 EN-25
Fig. 1