DNIPRO M EN-25, Руководство по эксплуатации

Страница: 17 / 32

ES-16, EN-25
13
ENG
• Be careful. Ensure to have proper foothold and do not lose balance.
• Ensure proper technical maintenance and repair of electric tool in a careful and
responsible manner. To achieve best performance and provide safety during works,
gently handle the tool and keep it clean. Follow instructions in relevant manuals when
replacing the accessories. Periodically inspect mains cable and in case of any damage
replace it in service centre.
• Regularly inspect extension cords you use, and in case they are damaged replace them.
The tool handle should be dry and clean; avoid its contamination with lubricants.
• Unplug the tool, if it is not in use, before maintenance, and also prior to
replace accessories.
• Be careful. Be aware of what you do. Keep common sense. Do not work with the
power tools if you are tired, took medications that contain drugs or can cause
drowsiness, as well as alcohol and any other substances and products that impair
attention and concentration.
• Check if parts are not damaged. Before operating the electric tool, carefully check
all the parts and connections for damage and make sure that they are in a proper
condition and functionality. Check if movable parts are reliably fixed. Do not operate
the tool if the power button is damaged. Damaged parts shall be replaced at the
Dnipro-M service centre.
• The tool should be repaired only in the authorized service centre using the original
Dnipro-M spare parts. Otherwise serious damage may be caused to user’s health.
3. SAFETY RULES
Strictly observe safety precautions during the operation and maintenance of the tool. In
the process of the tool operation, follow all instructions of operating manual, handle it with
care, protect against impacts, overloads, dirt and aggressive environment. The following
rules shall be observed in the process of the electric tool operation:
• All works on the tool makeready, maintenance and repair shall be carried out only after
its disconnection from the mains.
• Unplug the tool from the mains when you change accessories, during long-term (more
than 15 minutes) idle period or upon the work completion.
• Use ear protectors and safety glasses.
• Do not carry the tool by the power cord. Do not wind cable around your hand or other
parts of body.
• Avoid the power cord tensioning, twisting and getting into working area or under
different loads, as well as contact with hot or oily surfaces.
• Use only recommended staples, nails, studs during the work.
• Upon the work completion clean the tool from dust and dirt.
Keep the tool in a dry place, far away from children and outsiders. Storage temperature
shall be -5°С to +40°С. Let the tool warm up for at least for 2 hours when you’ve carried
it from the cold to a warm room. After that you can connect the machine to the mains. To
prevent risk of electric shock, do not expose the electric tool to rain or moisture.
Do not try to open the tool by yourself. For maintenance or fault management, contact
Dnipro-M service centres only. The tool is intended only for household purposes; it
is very recommended not to use it for professional and industrial works. In case this