DMX-LED-Dimmer X9HR
9
DMX-Addressing
The starting address is adjustable with the switches 1 to up 9.
Switch 1 has the valency 2
0
(=1), switch 2 the valency 2
1
(=2) etc. until switch 9 has
the valency 2
8
(=256). In total the switches showing ON correlate with the starting
address.
LED-Display
The integrated LED is a multifunctional-display.
During the normal DMX-Operation the LED flashes permanent. In this case the
device is working.
Furthermore, the LED shows the event. In this case the LED lights in short pitches
and then turns into the off mode for a longer period. The number of flashing impulses
corresponds with the error status:
Error
Status
Error
Description
1
No DMX
There is no DMX-Signal reaching the
dimmer
2
Address error
Check if a valid DMX starting address is
adjusted at the DIP-switch
4
Factory Reset
A Factory-Reset was executed
1
2
4
8
1
6
3
2
6
4
1
2
8
2
5
6
O
F
F