DMX-LED-Dimmer X9HR
12
Operation modes
The
DMX-LED-Dimmer X9HR
has several operating modes that can be set using
configuration switches 3 and 4:
- 9Ch. Dimmer 8Bit with dimming curve
- 9Ch. Dimmer 16Bit
- 9Ch. Dimmer 8Bit 2kHz (linear)
- 9Ch. Dimmer 8Bit 4kHz (linear)
The operating mode (configuration switches 3 and 4) can be combined with
the DMX master dimmer (configuration switches 1 and 2).
9Ch. Dimmer 8Bit with dimming curve
In this operating mode, each output is controlled with a DMX channel
(8Bit). A freely programmable dimming curve (look-up table / curve
definition) is available for each output, which maps the 8-bit DMX value to
the 16-bit resolution of the output. The output characteristics are
preprogrammed linear and can be freely programmed.
9Ch. Dimmer 16Bit
In this operating mode, each output is controlled with two DMX channels
(16Bit). There is a 16-bit resolution for each output, which is mapped
directly via the DMX values. 2 DMX channels are used per output. The
2nd DMX channel is the fine adjustment.
Configuration switches