DMX-LED-Dimmer X9HR
23
Execute firmware Update
The
DMX-LED-Dimmer X9HR
has Update-Function, which allows transferring future
firmware versions.
Please proceed as follows:
-
Turn off the device (disconnect power supply and USB connection !)
-
Set switch 7, 8and 10 on ON
-
Set switch 9 on OFF
-
Generate USB connection to PC
-
Install the USB driver if necessary (check in the device manager)
-
Start the Update-Software
DMX4ALL USB-Updater
-
Select DMX-LED-Dimmer X9HR from list
-
Click
Firmware-Update
-
Select Firmware file (.bin) and confirm
-
Wait until update has finished
No program is allowed to access the USB-Connection.
Close the DMX-Configurator and USB-Updater before USB-Cable is
connected to the DMX-LED-Dimmer X9HR. Do not start the USB-Updater if
the DMX-LED-Dimmer X9HR is in its update-mode.
If an error occurs during the update, you can start from beginning every time.