background image

 

Risk-Notes 

 

 

You purchased a technica
available technology the following risks should not excluded:

 

 

 

 

 

 

Failure risk:

 

The device can drop out partially or completely at any time without warning. To 
reduce the probability of a failure a redundant system stru
 

Initiation risk:

 

For the installation of the board, the board must be connected and adjusted to 
foreign components according to the device paperwork. This work can only be 
done by qualified personnel, which read the full device paperwo
it. 
 

Operating risk:

 

The Change or the operation under special conditions of the installed 
systems/components could as well as hidden defects cause to breakdown within 
the running time. 
 

Misusage risk:

 

Any nonstandard use could cause inca
 

Warning:

 It is not allowed to use the device in an operation, where the safety of 

persons depend on this device
 

Initiation risk:

  For the installation of the board, the board must be connected and 

adjusted to foreign components according to the device paperwork. This work can 
only be done by qualified personnel, which read the full device paperwork and 
understand it. 
 

Operating risk:

 The Change or the operation under special conditions of the 

installed systems/component
within the running time. 
 

Misusage risk:

 Any nonstandard use could cause incalculable risks and is not 

allowed. 
 

Warning: 

It is not allowed to use the device in an operation, where the safety of 

persons depend on this device

DMX-LED-Dimmer BB4

 

 

You purchased a technical product. Conformable to the best 
available technology the following risks should not excluded:

The device can drop out partially or completely at any time without warning. To 
reduce the probability of a failure a redundant system structure is necessary.

For the installation of the board, the board must be connected and adjusted to 
foreign components according to the device paperwork. This work can only be 
done by qualified personnel, which read the full device paperwork and understand 

The Change or the operation under special conditions of the installed 
systems/components could as well as hidden defects cause to breakdown within 

Any nonstandard use could cause incalculable risks and is not allowed.

It is not allowed to use the device in an operation, where the safety of 

persons depend on this device. 

For the installation of the board, the board must be connected and 

omponents according to the device paperwork. This work can 

only be done by qualified personnel, which read the full device paperwork and 

The Change or the operation under special conditions of the 

installed systems/components could as well as hidden defects cause to breakdown 

Any nonstandard use could cause incalculable risks and is not 

It is not allowed to use the device in an operation, where the safety of 

depend on this device

17 

 

l product. Conformable to the best 

available technology the following risks should not excluded: 

The device can drop out partially or completely at any time without warning. To 

cture is necessary. 

For the installation of the board, the board must be connected and adjusted to 
foreign components according to the device paperwork. This work can only be 

rk and understand 

The Change or the operation under special conditions of the installed 
systems/components could as well as hidden defects cause to breakdown within 

lculable risks and is not allowed. 

It is not allowed to use the device in an operation, where the safety of 

For the installation of the board, the board must be connected and 

omponents according to the device paperwork. This work can 

only be done by qualified personnel, which read the full device paperwork and 

The Change or the operation under special conditions of the 

s could as well as hidden defects cause to breakdown 

Any nonstandard use could cause incalculable risks and is not 

It is not allowed to use the device in an operation, where the safety of 

Содержание DMX-LED-Dimmer BB4



















Отзывы: