Set output current
Each output has a regulator for settings
The output current is in the range from
Before connecting a LED to an output please adjust the
current for the LED !!!
For adjusting the output current,
-
Set up the DIP-switch 1 up to
-
Connect the power supply
-
Now connect a current meas
range should not be chosen
-
Please adjust now the LED
-
Repeat this measuring and adjusting for every channel.
To get an optimal result please adjust a power supply to 12V.
higher power supply it is
instrument.
12V=
Regulator for
power.
DMX-LED-Dimmer BB4
a regulator for settings adjusting the maximal output current.
in the range from 330mA up to 1500mA.
Before connecting a LED to an output please adjust the suitable operating
current for the LED !!! Only in this case a safety use can be guaranteed.
For adjusting the output current, please proceed as follows:
up to 5 and 10 to ON
Connect the power supply
measurement device to the LED-outputs. The measure
chosen higher than 2A.
Please adjust now the LED-operating current with help of the regulator for
epeat this measuring and adjusting for every channel.
imal result please adjust a power supply to 12V.
higher power supply it is recommendable to use LED in series to the measure
A
6
adjusting the maximal output current.
suitable operating
Only in this case a safety use can be guaranteed.
tputs. The measure
regulator for settings.
imal result please adjust a power supply to 12V. If you use a
recommendable to use LED in series to the measure