Wireless ArtNet-DMX 1.1
11
DMX-Input (DMX to Art-Net)
To use the
Wireless ArtNet-DMX 1.1
as DMX-Input-Interface, the Interface-Mode
DMX- Input
must be chosen.
The
Update-Rate
can be adjusted with which the DMX-Input data should be
outputted via Art-Net.
40Hz … 5Hz
- The DMX-Data will be outputted with the adjusted transfer rate
On change data
- DMX-Data are only transferred if these change
DMX Frame rate
- DMX-Data are transferred as soon as a frame is closed.
So the frame rate from the inputted DMX-signal will be used for
the Update-rate
Several actions can be chosen for the DMX-Input in the case of a DMX-Signal (
DMX-
FAIL
).
NO DATA
- via Art-Net is no DMX-Input received
HOLD last DMX data
- the last data are retained
CLEAR all channels to 0% - all DMX-Channels are set to 0
SET all channels to 100% - all DMX-Channels are set to 255
The Art-Net-Parameters
Net
,
SubNet
and
Port/Universe
specify the DMX-Data
source.
Via Art-Net the DMX-Data are sent to the
Dest. IP
(Destination IP). This is to adjust
in the same way as the Device-IP.
If
Broadcast
is activated, like in the image, so the DMX-Data are sent per Art-Net in
the whole net work to ALL devices.
Each Art-Net-Device, which has the consistent settings for Net, Subnet and
Port/Universe, accept the DMX-Data!
