Wireless ArtNet-DMX 1.1
14
Factory Reset
The
Wireless ArtNet-DMX 1.1
can be set back into the delivery status.
Please proceed as follows:
-
Press RESET ca. 5 seconds until the RESET-LED shines
-
Release the RESET and the Wireless ArtNet-DMX 1.1 will be set back into the
delivery status.
Execute the Firmware Update
The
Wireless ArtNet-DMX 1.1
has an Update-Function, which allows transferring
prospective firmware-versions.
Please proceed as follows:
-
Turn off the device
-
Establish a USB-Connection to PC
-
Press RESET and turn on the Wireless ArtNet-DMX 1.1
-
The WPS-LED and RESET-LED flashes alternate
-
Install the USB-Driver if necessary
-
Start the Update-Software
DMX4ALL USB- Updater
-
Select the
Wireless ArtNet-DMX 1.1
from the list
-
Click
Firmware-Update
-
Select the Firmware-Datei (.bin) and confirm
-
Wait until the Update has finished
If an error occurs during the update you can start at the beginning
at any time.
