Page
|
12
Marquee
Technical
Guide
‐
Version
6.2.0
–
090110
11Giraffes
©2010
All
Rights
Reserved
Video Pass-Thru
Adapter (SD)
Configuration
Pre-Installation Steps
Marquee players support specific video pass through devices. The W610 supports the Hauppauge
HVR1950 for standard definition and the Hauppauge HD-PVR for high definition.
Gathering the following information prior to installation will help identify the proper equipment
and cabling requirements, and simplify the installation process:
•
What is video pass-thru source? Is it High Definition?
a.
Cable tuner or satellite receiver
b.
Wall-plate (coaxial cable wall-jack with no cable tuner)
c.
Surveillance system, DVD, VCR, DVR, other
•
Which of the Marquee-supported video outputs are available from the source device?
d.
S-Video
e.
Composite
f.
Component (YCrCb, RGB or YPbPr)
g.
RF (e.g., coaxial wall-jack with no cable tuner)
•
If the source is Standard Definition, will the aspect ratio be 4:3 (traditional TV) or 16:9
(wide-screen)?
•
If the source is Standard Definition cable television, and there will not be a cable
tuner/receiver, is there a specific channel that the Marquee player should be tuned to?
