6
SecureCom Smart Z-Wave Thermostat Installation Guide
Install the Back Panel
Remove the back panel of the thermostat by pushing down the thumb tab on the bottom of the
body .
Figure 3 . Removing back panel of thermostat .
Mount the thermostat back panel on the wall (See Figure 4) .
1 . Use the two (2) wall anchors and two (2) Phillips screws (provided) to mount the back
panel .
2 . Level as needed .
Figure 4 . Mounting the Back Panel
BACK PANEL
BODY (WITH PCB)
PUSH ON THUMB TAB TO RELEASE
BACK PANEL
Y2 Y1 G RC C RH W1 W2 Standard
Y2 Y1 G R C R WI 0 Heat Pump
ANCHORS (2) PROVIDED
PHILLIPS SCREWS (2) PROVIDED