SecureCom Smart Z-Wave Thermostat Installation Guide
23
Clock Menu
Use the clock menu to set thermostat’s internal clock .
Figure 26 . Clock Setup
Setting the Clock
1 . Press any button to take thermostat out of sleep mode .
2 . Press
FAN
button for 5 seconds until,
SETUP
appears in status display line .
3 . Use
buttons to select
CLOCK
in status display line .
4 . Press
SELECT
,
DAY
will be displayed
5 . Press
buttons,
TIME
will be displayed .
6 . Use the
buttons to select the current time .
7 . Press
SELECT
,
DONE
,
DONE
.
INFO Menu
The INFO menu displays information about the thermostat . Use the
buttons to scroll
through the various items .
•
MODEL Z-5010T
• VERSION Thermostat firmware version.
• ZWAVE Z-Wave firmware version.
•
NODE ID Z-Wave Node ID .
•
HOME ID Z-Wave Home ID .
•
SYSTEM TYPE displays current System Type setting .
•
If System Type = Standard, FAN TYPE displays current Fan Type setting .
•
If System Type = Heat Pump, CHANGEOVER TYPE displays current Change Over setting .
•
Battery xx% = Battery Level (If battery powered)
MODE
FAN
Select
Done
CLOCK
PRESS AND HOLD
FOR 5 SECONDS
USE THE
BUTTONS TO CHANGE
TO THE DESIRED MENU
ITEM, THEN PRESS
SELECT
MENU CHOICES ARE
DISPLAYED IN THE
STATUS DISPLAY LINE