12
SecureCom Smart Z-Wave Thermostat Installation Guide
Entering Menu Mode
To change the System setup, go to the thermostats Menu Mode and select
SYSTEM
. From there
select the correct HVAC settings to match the installation type .
Press and hold the
FAN
button to enter the Menu Mode .
SETUP
is the first menu item displayed.
Press the
button to advance to the
SYSTEM
screen .
Figure 14 . Menu Mode Setup
Menu Mode Navigation
When the Thermostat Menu Mode screen is displayed, press the
buttons to scroll through
the following menu items .
Figure 15 . Menu Navigation
The following menu items are displayed in order .
•
SETUP (user preference settings)
•
SYSTEM (HVAC system setup)
•
Z-WAVE (install/uninstall from Z-Wave network)
•
CLOCK (set time and day)
• INFO (firmware versions and Z-Wave network information)
MODE
FAN
Select
Done
SETUP
PRESS
SELECT
TO
ENTER THE SELECTED
MENU
PRESS
DONE
TO
EXIT BACK TO THE
MAIN THERMOSTAT
SCREEN
USE THE UP/DOWN
BUTTONS TO CHANGE
TO THE DESIRED MENU
ITEM, THEN PRESS
SELECT
MENU CHOICES ARE
DISPLAYED IN THE
STATUS DISPLAY LINE
MODE
FAN
74
Off
Auto
72H 80c
F
TO SELECT THE
MENU MODE, PRESS
AND HOLD THE
FAN
BUTTON UNTIL THE
SETUP SCREEN IS
DISPLAYED