SecureCom Smart Z-Wave Thermostat Installation Guide
1
Model Z-5010T
SecureCom Smart Z-Wave Thermostat
Installation Instructions
The SecureCom Smart Z-Wave Thermostat Model Z-5010T is a programmable, Z-Wave
communicating thermostat . It can be powered using 24VAC (if both “R”&”C”wires are available
at the thermostat), or using four (4) AA batteries . Using Z-Wave technology, end users have the
ability to use most compatible Z-Wave hubs/controllers to operate and animate the thermostat,
configure programming settings, as well as to display current conditions in the home or office.
Figure 1 . Z-Wave Thermostat Front View
MODE
FAN
BATTERIES (4)
PHILLIPS SCREWS (2)
ANCHORS (2)
WIRING LABELS SHEET
Z-5010T THERMOSTAT
Features Include:
• A fixed format display with white
backlight
•
Heating and cooling setup display options
•
System mode (OFF, Heat, Cool, Auto,
E-Heat)
•
Fan mode control and display (Auto, ON)
•
Changeover type for Heat Pump (HP)
systems
•
On-screen setup of HVAC type, Fan type
•
F/C mode, and sensor calibration
Compatible with 24 VAC gas, oil, or
electric heating and air conditioning
systems; or gas millivolt heating
systems
DO NOT USE ON 120VAC SYSTEMS!
Standard Systems
•
1 Stage Heating and Cooling
•
2 Stage Heating and Cooling
Heat Pump Systems
•
1 Stage Heating and Cooling
•
2 Stage Heating and Cooling
•
2nd or 3rd Stage Aux Heating (Electric
Heat Strips
Box Contents
•
1 - Z-Wave Thermostat
•
1 - Sheet Adhesive Wiring Labels
•
2 - Plastic Wall Anchors
•
4 - AA Batteries
Installation Outline
•
Step 1 Remove Existing Thermostat
•
Step 2 Install Z-5010T Thermostat
•
Step 3 Setup Thermostat to match System
Type
•
Step 4 Install into Z-Wave Network