DMP Electronics 734N Series, Инструкция по установке и программированию

Страница: 35 / 60

Digital Monitoring Products, Inc. | 734N Series Installation and Programming Guide 31
OSDP Secure Key
The secure key is programmed into the OSDP reader
and is used to establish 128‑bit AES encrypted two‑way
communication between the reader and module.
Record this key and store it in a secure location away from
the module and reader. After the reader is bonded to the
module, the secure key cannot be changed in the reader
or retrieved from 734N Series programming. Replacement
modules can be bonded to any compatible reader with the
reader’s secure key.
Caution: OSDP readers can only be programmed locally
from the module with a keypad. To properly bond the
reader to the module, the 734N Series must be initialized
and the reader must be new or factory reset. After
programming is complete and the keypad is disconnected,
the reader is bonded to the module and cannot be
reprogrammed with a different secure key until it is
factory reset by the manufacturer.
Press a select key or area to enter a secure key up
to 16 alphanumeric characters. These characters are visible
until CMD is pressed.
SECURE KEY
****************
SECURE KEY