DMC Combine CALC-U-DRI II, Руководство пользователя

Страница: 5 / 24

CONTROL BOX INSTALLATION
1. The Combine Calc-U-Dri II control box is designed to be mounted to the ceiling
of the combine cab or any convenient location. Select a location in the cab and
check the area above for any hoses, tubes or electrical wiring that could be dam-
aged by the control box mounting screws.
2. Open the Calc-U-Dri box by loosening the screws on the front bottom corners.
See Photo B.
3. Hold the box up to the chosen location and
mark the mounting holes through the top of
the box.
See Photo B & Diagram 1. (Note:
Six mounting holes are provided in the
Combine Calc-U-Dri box. Use two or four of
the holes to mount the Calc-U-Dri to the
combine ceiling, depending on the
obstructions in the ceiling and/or the
sturdiness of the material from which the
ceiling is made.
Diagram 1
Pilot holes (9/64” diameter) can be drilled or
the self tapping screws that are provided can
be used to secure the box to the ceiling. Double check to make sure that no
components can be damaged in the cab roof area by the mounting screws.
3
Photo B