DMC Combine CALC-U-DRI II, Руководство пользователя

Страница: 2 / 24

TABLE OF CONTENTS
Safety Instructions i
Introduction to DMC’s Combine Calc-U-Dri II 1
Operation 1 - 2
Installation of Control Box & Digital Display 3 - 5
Installation of Sensor 5 - 7
Installation of Averaging Switch 8 - 9
Sampling Procedure 10
Parts Listing 11
Trouble Shooting Guide 12 - 14
Warranty 15
DMC Distribution Centers Listing 15
Offset Recommendations 15
Optional Elevator Sampler Installation 16 - 20
!!CAUTION!!
BE A SAFE OPERATOR
1. Read and understand this Owner’s Manual
2. Stop the combine threshing unit and engine
before sampling, adjusting or servicing.
Use caution when obtaining a sample from
the grain hopper. Follow combine manufac-
turer’s recommendations when climbing in
and out of the hopper.
3. Disconnect all electrical power before
servicing or opening control box.
4. Ground all electrical equipment properly.
5. Only knowledgeable and trained personnel
should operate this equipment.
Failure to follow these instructions may result
in personal injury or property damage.
i
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○