7
Basic Operation
Mounting your DK Meter
The DK Meter is supplied with an adjustable mounting bracket. The top piece is
mounted onto the DK Meter with the two included screws, while the desktop
piece is mounted with four screws.
Additional fixing options and mounts are available from DK-Technolgies.com or
from RAM on
http://www.rammount.com
.
The included model number is: RAP-B-138U
Power Supply
The DK Meter comes with a plug-top power supply with a USB outlet. If being
used in conjunction with a computer or USB hub, any conventional USB-A outlet
with the standard USB 5 volt supply may be used instead of the included power
supply unit.
This elegant feature not only makes the DK Meter easier to bring along, but also
conveniently allows the DK Meter to power up with the relevant computer of your
setup.
Navigation
The general navigation on the DK Meter is achieved through the three capacitive touch sensitive buttons below
the screen.
Each touch button corresponds to the on-screen button and dynamically changes name as relevant.
In addition, swiping across the three buttons from left-to-right or vice versa, allows you to change the overall
meter view or selected menu.
Note: When fixing the mounting plate to the rear of the meter, use only
the screws supplied – damage may be caused by using longer screws, or
different mounting back plate.
