12
Upgrade Option Trial
Every DK Meter comes with all Upgradable options running on a 180 hour trial
time. This effectively means that you have the chance of checking out various
functions and features before making up your mind on potential upgrades.
The Upgrade Option Trial folder shows you how many trial hours you have left
before the Upgrade functions will be shut off.
For further information on Software Upgrades, please refer to the ‘How to
Upgrade Your Meter’ section of this manual.
The DK Meter family overview of upgrade and included options can be view in ‘The
‘DK Family’ section.
How to …
The Quick Setup features a few ’How to...’ descriptions.
Please refer to the complementary ‘How to…’ section of this manual for a detailed description and tips on how to
perform specific tasks using the DK Meter.
Backlight and Standby
The backlight parameter allows you to set the brightness of your meter. Hit the ‘Select’ button and use arrow
up/down to set the desired backlight level. De-select the backlight parameter by hitting ‘Select’ again.
The Standby parameter enables the meter to be put into standby mode. Hit any of the three touch sensitive
buttons to wake up your meter.
Meter Views – an Overview
This section gives you a quick overview of the different views available in the
Portrait Bargraph (View 1)
The Portrait bargraph view features a number simultaneous
viewings and readouts.
The default functions of this view includes 4 text readouts at the
top, level bargraphs and the option of adding phase and
vectorscope at the bottom of the view.
The Loudness indication may be a single or dual bargraph,
allowing for two different loudness parameters to be viewed at
the same time.
In addition to the traditional bargraphs, this view also has the
ability to show level and loudness as moving coil emualations.
The moving coil emulation may be changed here:
Adv. Setup/Preset/Meter Setup/Display mode
