DK System Master 500, Руководство по эксплуатации, Страница: 19 / 36

This parameter allows you to set the power at which the fan is to operate in manual
mode (testing). Change range: from 1% to 100% of maximum fan power, set in the
maintenance menu - see
Adjusting the maximum fan power .
Manual operation - blowing power
Pressing again takes you to the next setting.
A window allowing testing the correctness of operation of individual outputs (feeder,
fan, CH pump, DHW pump).
Select the tested output with the button , and to enable/disable it press the or
button. The output currently being checked is indicated by a blinking symbol on the
screen and lighting up the appropriate LED. .
Manual operation - testing outputs
A window indicating the currently measured temperature of the boiler (temperature),
the hot water heater (DHW), the feeder (Feed).
Temperatures 16
19
Manual operation 15
This function is used testing the correctness of the connected equipment. To enter the
manual operation menu, press the button ; the display will show HOT WATER.
Then use the or buttons to select the MANUAL OPERATION option and confirm
with .