DK Digital AVR-500, Руководство пользователя, Страница: 21 / 28

3. Press the MEMORY key on the remote control slightly. As long as MEM is
flashing in the display (ca. 5 sec.), select the desired preset (1 – 15)
using the /- keys. The number is shown in the display.
4. Press the MEMORY key once again to save the channel there. Repeat steps
2-4 until all desired channels are saved.
Calling presets
During radio operation, press the STATION key at the device or the /- keys in
order to call saved stations.
RDS function
Your AV-receiver is equipped with the following functions:
—
PS ( P rogramme S ervice):
If you receive a RDS-channel, after some time, the name of the station is shown in the
display. You can also press the DISPLAY key of the remote control repeatedly until
- - PS - -
is flashing in the display. After some seconds, the name of the station is shown.
—
PTY ( P rogramme Ty pe):
If you receive a RDS-channel, you can press the DISPLAY key of the remote control
repeatedly until
- - PTY - -
is flashing in the display. After some seconds, the programme type of the set station is
shown. The abbreviations stand for the following programme contents:
NEWS Finance
AFFAIRS Children
INFO Social
SPORT Religion
EDUCATE Phone In
DRAMA Travel
CULTURE Leisure
SCIENCE Jazz
VARIED Country
POP M Nation M
ROCK M Oldies
EASY M Folk M
LIGHT M Document
CLASSIC Test
OTHER M Alarm
!
Weather
—
CT ( C lock T ime) - Time information:
If you receive a RDS-channel, you can press the DISPLAY key of the remote control
repeatedly until
- - WAIT CT - -
is flashing in the display. After some seconds, the time transmitted by the radio station is
shown. The reason for a possible delay in the display of the time may be the fact that this
signal is only transmitted one time per minute.
21