DK Digital AVR-500, Руководство пользователя, Страница: 20 / 28

Radio operation
Your AV-receiver is equipped with a high-quality FM / medium wave (AM)
receiver with RDS-function. RDS (Radio Data System) is a system for the
additional information transmittal with the FM-radio programme. RDS
radio tuners are able to filter this information out of the transmitted signal
and make it useful for different functions, e.g. for showing the station’s
name in the display or for searching for stations with certain programme
contents. Not all FM-stations transmit RDS-information.
Searching for channels
1. Press the TUNER/BAND key at the device or the TUNER key of the
remote control. In the display, the abbreviation of the frequency band (FM
or AM) as well as the currently set receiving frequency appears.
2. In order to switch to the other frequency band, press the TUNER/BAND key
at the device or the BAND key of the remote control again.
3. Using the AUTO/MANUAL key of the remote control, you can switch
between manual and automatic channel search.
In automatic channel search (= “AUTO” can be seen in the display), press
the or – key slightly in order to make the device search for
the next channel having a higher or lower frequency and a sufficiently
strong signal. Then the search stops and the found channel is played. In
manual channel search, you press the or – key repeatedly in
order to change the receiving frequency upwards or downwards and to
adjust the desired channel.
Tip:
Ø
This procedure lends itself if the signal of the desired channel is not strong enough
for being perceived by the automatic channel search.
4. Press the STEREO key at the device or the ST/MONO key of the remote
control during FM-operation in order to switch between stereo and mono
operation. In stereo operation, the stereo sign “
” is illuminated in the
display.
Tipp:
Ø
If the reception of a FM-stereo programme appears to be too noisy, switch to mono
in order to reduce the noise.
Storing channels
Your AV-R500 has 15 presets for FM and 15 presets for AM that you can occupy
automatically or manually with your preferred channels.
Automatic channel storing
1. Choose the desired frequency band – FM or AM.
2. Then press the APS key so that the device automatically saves the 15
channels with the strongest reception on the presets.
Manual channel storing
1. Choose the desired frequency band – FM or AM.
2. Set the first channel that you want to save.
20